PoolBelt | Round | Steel Frame/Frame | Mounting Kit

Description

Fastening material in the outdoor area is exposed to all kinds of weather and must withstand a lot. For this reason, we pay attention to high quality and use robust webbing as well as clamp locks made of solid metal. And best of all: We manufacture the fastening set for tarpaulins completely in Germany.

How to attach the mounting kit?

In the video we explain how you should proceed and what you have to pay attention to.

The wide 35mm webbing is placed at the very bottom of the pool and tightened. For steel frame pools (frame pools), this is done below the curvature of the liner (it is created by the weight of the water and thus creates a kind of "belly"). You thread the small supplied loops into the wide strap beforehand and position them at regular intervals around the pool - this will help you later when attaching the vertical bands. The last step is to thread the vertical straps through the loops as well as the eyelets of your pool cover.

By the way: We deliver everything with every set so that you can winterize your pool perfectly.

For example, a sufficient number of universal sliding clips are included, which you can use to connect the vertical straps to your cover. This is especially useful if your tarp does not have eyelets, or you want to be flexible with the position (e.g. if a filter pump is in the way).

For detailed instructions, please watch our video. You can also find valuable recommendations for winterizing your pool under Tips&Tricks.

Is the PoolBelt also suitable for other pool sizes?

The system is suitable for smaller pools without any problems. So, for example, you can use a 3,660 mm system for a pool with a diameter of, say, 3,500 mm. If necessary, the horizontal band is then simply a little too long. Shortening is always possible at home, just use a pair of scissors and a lighter to reseal the fibers.

Das System kann auch für geringfügig größere Pools verwendet werden, also z.B. 3.660 mm für 3.750 mm. Für größere Pools kannst du auch unseren Verlängerungsgurt nutzen!

Bitte beachte: Wir empfehlen das System nur für Stahlrahmen Pools! Bei Stahlwandpools fehlt die „Wölbung“ durch die der untere Gurt gehalten wird (siehe Bilder). Bei Stahlwandpools rutscht das horizontale Band durch den vertikalen Zug nach oben.

✔ Ideal for round steel frame pool (frame pool)
(not suitable for steel wall pools!!)

✔ Reliable fastening of the cover sheet

✔ Optimal for taut tensioning with downward pull

✔ High quality horizontal webbing: width 35mm

✔ Vertical webbing (number varies depending on pool format: width 25mm)

✔ Clamp locks made of solid metal

✔ Universal sliding clips included in the set (for connecting the webbing straps to the tarpaulin if no eyelets are available).

Overview of the length of the horizontal webbing: 

25591 | for round pools Ø 3,660 mm | steel frame | Length webbing horizontal: approx. 13 m | number of vertical webbing: 14 pcs.

25607 | for round pools Ø 3.960 mm | steel frame | Length webbing horizontal: approx. 14 m | number of vertical webbing: 15 pcs.

25598 | for round pools Ø 5.000 mm | steel frame | Length webbing horizontal: approx. 17 m | number of vertical webbing: 19 pcs.

Dein Pool ist größer? Nutze unseren Verlängerungsgurt!

Additional information